Specifications

Castle Care-Tech Ltd. Engineering
Page 13 - 22 Chapter 13
PROGRAMMING
PROCEDURE:
With the display showing
CHANGE CODES?
Press YES
Change Duress
Codes?
Press YES
User Number
[01]
Use number keys to select code
to be changed
User Code
[ ]
Use number keys to enter new
code, or present Tag to reader
to programme this.
Display shows [******] if a code
is already programmed, or [Tag]
if a tag allocated: enter
replacement code/tag, or press
C to delete.
Press YES
Code Type
Duress [2]
Use D to select between ‘ Duress
[2]
’ and ‘ Guard Code [3] ’
User and Manager codes can be
programmed ONLY from the
Manager menu.
Press YES
Areas
[AB]
Use A and B to select Areas
code is to be valid for. Whilst
this is being done, the Area
‘ A ’
and ‘ B ’ keys will be illuminated
to reflect the choice made
Press YES
User Set Options
Unset/Set [0]
Use D to select between
‘ Unset/Set [0] ’‘ Unset only [1] ’
‘
Set only [2] ’ and ‘ None [3] ’
Press YES
Flexi-Set
No [0]
Use D to select between ‘ No [0] ’
and ‘ YES [1] ’
If selected, the user will be
able to choose which area(s)
are set/unset, from those the
code is valid for.
If allocated to a tag, ‘flexi-
set’ will only be operative when
tag is presented at a Keypad.
Press YES
User Name
_
Enter text, as described on page
13
- 3
Press YES
User Number
[01]
Repeat this procedure for
additional codes, or
Press YES
Change Duress
Codes?