Specifications

Castle Care-Tech Ltd. Engineering
Page 13 - 14 Chapter 13
Whilst programming this step, the
keypad Area (A,B) keys will
illuminate when that area is
selected.
Press YES
Set Point Unsets
Areas [ABCD]
Press appropriate key(s) to
select the areas required, eg
Press
A
Set Point Unsets
Areas [A ]
Whilst programming this step,
the keypad Area (A,B) keys will
illuminate when that area is
selected.
Press YES
Set Point In
[ABCD]
Press appropriate key(s) to
select the areas required, eg
Press
A
Set Point In
[A ]
Whilst programming this step,
the keypad Area (A,B) keys will
illuminate when that area is
selected.
Press YES
NOTE: For control of ‘ Common
Lobby
’ type applications, it
should be selected as
‘ IN ’
multiple areas.
Press YES
Set Point Name?
Permits name to be programmed
for Set Point to simplify locating
the item in the future.
Press YES
Set Point Name
Reader 0
Enter text, as described on page
13
- 3.
Press YES
Address
[0]
EITHER key in next keypad
number to programme, or NO to
exit function
Press NO
ASSIGN KEYPADS/
READERS?
Press NO
Moves to next menu item
PROGRAMMING A TAG READER AS
A ‘SET POINT:’
With display showing
ASSIGN KEYPADS/
READERS?
Press YES
Address
[0]
Select address required, eg
Press
4
Address
[4]
Press YES
Type
Not Used [2]