Warranty

Care Tips
1. Keep clean with mild soap and water, do not use silicone based cleaners or
treatments
2. Do not scrape or drag cover
3. Do not use vapor seals to lift or remove cover (pouches at inside ends of hinge
area)
4. Do not lift cover without unfastening locking straps
5. Keep water and snow off top of cover
6. Do not walk, sit or lean on cover
7. Attach all locking hold down straps when installing and fasten when not in
use to prevent heat loss
8. Use handles & straps for positioning only, seams will not support the weight
of spa cover
Inner Core Maintenance
Important: Excess chemicals and/or chemical imbalance will deteriorate the plastic
vapor barrier. When vapor barrier is damaged, inner cores will absorb moisture.
The following instructions will prolong the life of your plastic vapor barrier and
inner foam cores.
1. Remove the cover completely when adding chemicals or shocking and leave it
off for a period of 30 minutes or until the chemical level is back to normal. It
is very important to take the cover off, not just flip one side open.
2. Spray or wipe off the bottom side of your cover approximately once a month
to remove the excess chemical residue from the plastic barrier. These excess
chemicals are what cause the plastic to dry out and crack.
3. Approximately every 6 months, take the inserts out of the casing and flip
them over and re-insert so that the opposite side of the insert is over the
water.
Warning
Avoid drowning risk
1. STAY OFF COVER – WILL NOT SUPPORT WEIGHT
2. KEEP CHILDREN AWAY –CHILDREN OR OBJECTS CANNOT BE
SEEN UNDER COVER
3. REMOVE STANDING WATER – CHILD CAN DROWN ON TOP OF
COVER
4. REMOVE COVER COMPLETELY BEFORE ENTRY OF BATHERS –
ENTRAPMENT POSSIBLE.
5. NON-SECURED OR IMPROPERLY SECURED COVERS ARE A
HAZARD
6. CHECK COVER FREQUENTLY FOR DAMAGE AND/OR PREMATURE
DETERIORATION