CSE010-0164-00 Sidewinder SV4 Driver's Ed Guide

19
Using Castle Link
Disconnect the RX (Orange/Red/Brown) wire from your receiver and connect it to the Castle Link USB
adapter. Castle ESCs may also be programmed using your transmitter and receiver (see Transmitter
Programming, page 19), or a Field Link Programming Card (see Field Link Programming Card, below).
FIELD LINK™ PROGRAMMING CARD
You can use a Field Link programming card to easily change many settings at the field without your PC, or
it will function as a Castle Link adapter when you do have a PC available. For more information visit www.
castlecreations.com/fieldlink.
TRANSMITTER PROGRAMMING
Transmitter programming is very easy; simply answer YES or NO to a list of options. These are grouped into
five settings and each setting has several possible options. You can only accept one option per setting. By
answering YES to an option you will jump to the next setting. If you answer NO to an option you will move
to the next option within that setting.