CSE010-0164-00 Sidewinder SV4 Driver's Ed Guide

17
Audible Tone Key Description
• – –
Excessive
Load*
The ESC detected very high current spikes. Causes may include
damaged wiring leading to, or inside, the motor, the use of too
large a motor for the controller, excessive gearing, or improperly
soldered motor connections. If multiple Excessive Load errors are
detected, beeping will be disabled to protect the ESC. If the error
continues, contact Castle Tech Support.
– • –
BEC Over-
Temperature*
The ESC detected that the integrated BEC is overheating due
to current draw above the rating of the BEC. This is commonly
caused by faulty servos or a servo that exceeds the amp rating of
the BEC. (e.g. digital servos with very high torque/speed values)
*Not available on all Castle ESC models. See the Quick Start Guide for more clarification.