Sidewinder 8th Drivers Ed Guide

38
transmitter to have the throttle channel set to the reversed position.
Problem: My ESC calibrates for the full throttle and full brake positions but won’t
calibrate to the neutral throttle position (yellow LED keeps flashing with single beeps).
Solution: Try moving the throttle trim one way, then the other (usually towards the throttle
side is best). If your transmitter has a 50/50 and 70/30 setting for the throttle, set it for 50/50
and retry calibration. Also, if you have changed the dead band to a narrower band you may
want to try going back to the “normal” setting. If you have a Mamba Max Pro and the ESC is not
beeping, the yellow flashing light at neutral is normal and the ESC is ready for use.
Problem: My vehicle acts like it has “turbo lag” (poor acceleration/punch for the first
few feet or yards, and then it “kicks in”).