Sidewinder 8th Drivers Ed Guide

37
use a “Y” harness from the ESC battery input positive wire to connect to both the battery and
the positive side of the motor, or use a single wire from the positive ESC input to the positive
battery pole and then continue to the positive (+) side of the motor.
TROUBLESHOOTING
If you’re still having diculties with your Castle ESC after trying the suggestions oered here,
please contact Castle Creations technical support at the e-mail or phone number in the next
section.
Problem: My Castle ESC may or may not arm, but it will not calibrate to my transmitter.
Solution: Most calibration issues can be solved by changing settings on the transmitter. Make
sure you have both your throttle and brake endpoints (called EPA or ATV on your radio) on the
throttle channel out to between 100 to 120%. Make sure if you have a Futaba or Futaba made