Sidewinder 8th Drivers Ed Guide
36
connectors) connected to all three of the brushless motor wires. If the motor spins the wrong
way with forward throttle, swap any two of the wires to get the correct direction. (Applies to
sensorless brushless only. Reverse motor direction using Castle Link with sensored brushless
motors).
Option 2: Brushed Reversing
(See Reversing Brushed Motor Setup diagram on page 11). Uses the Red and Black ESC motor
wires (or outside motor connectors on the ESC) to connect to the (+) and (-) side of the brushed
motor. If the motor spins in the wrong direction with forward throttle, reverse the motor wires
for correct motor direction.
Option 3: Brushed High Power
(See Figure 3: High Power Brushed Motor Setup on page 12). Connect all three of the ESC motor
wires (or motor connectors on the ESC) to the negative (-) side of the motor. You can either