Sidewinder 8th Drivers Ed Guide

22
trigger is returned to neutral the beep pattern will change to 2 beeps followed by 1 beep
meaning that by selecting option 1 you jump to setting 2. If at setting 2: Brake Amount, you
reject option 1. 25% by going to full brake/reverse the beep pattern will change to 2 beeps,
meaning it’s still at setting 2, followed by 2 beeps meaning you are now at option 2 under
setting 2.
Look at the inside back cover of this guide to the Castle Car ESC Programming Guide. This
shows the programming sequence as settings and options. Accept or reject options, usually
selecting the default, unless you want to change that specific setting.
As an example, say you want to turn o the default Voltage Cuto to run NiMh batteries.
Work through the settings and options selecting the default options until you get to 7 beeps,
meaning Cuto Voltage, followed by 1 beep for option 1: None. This is the correct setting for
NiMh. Select option 1 by going to full throttle. Once you have changed the setting you want
you can unplug power from the ESC to get out of programming mode. You do not need to finish