Sidewinder 8th Drivers Ed Guide

20
without a Castle Link or a Field Programming Card. For basic use these settings are usually
enough to get you going.
Transmitter programming is very easy, simply answering YES or NO to a list of options. These
are grouped into 9 settings and each setting has several possible options. You can only accept
one option per setting. By answering YES to an option you will jump to the next setting. If you
answer NO to an option you will jump to the next option under that setting.
At each option, you can accept it by going to full throttle on your transmitter, or you can reject
the option by going to full brake. In programming terms full throttle is ‘YES,’ full brake is ‘NO.’
The ESC will indicate that it has accepted your selection by producing a continuous skipping
tone. When you get this tone, allow the trigger to go back to the neutral position to change to
the next setting or option depending on your selection.