Sidewinder 8th Drivers Ed Guide

17
STEP 6: After accepting the full brake endpoint the ESC will then blink the yellow LED. Now
relax the trigger to the neutral position. The ESC will now ring 4 times and flash the yellow LED
rapidly to accept the neutral position.
After accepting the neutral position, the ESC will ring twice, flash ALL the LEDs, and the yellow
LED will illuminate (solid yellow for all ESCs except Mamba Max Pro which flashes). This is the
arming tone and LED indication that the ESC IS NOW ARMED and the car will respond to throttle
inputs from your transmitter.
From this point on, when you connect batteries and turn the switch on, the ESC will give the
initialization tone and flash after a battery is plugged in and the switch is turned on, and the
arming tone will ring a second or two later. If the ESC is programmed for the Auto-LiPo setting,
it will beep the number of cells in your LiPo pack between the initialization tones and the
arming tones. After the arming tone plays, the ESC is ACTIVE and will respond to throttle