Sidewinder 8th Drivers Ed Guide

14
for positive and black for negative color scheme. Check your receiver documentation for correct
connection polarity if it’s not marked.
Note: most receivers use negative to the outside of the case and signal towards the inside of
the case.
ESC SETUP
ESC/Radio Calibration
Individual transmitter’s signals for neutral, full throttle, and full brake vary. You must calibrate
your Castle ESC so that it will operate eectively with your transmitter. Anytime the ESC is
powered up with a new transmitter, or with dierent throttle channel settings, it will need
to be calibrated to “know” what the transmitter’s throttle settings are. It will also need to be
calibrated after updating with new software via Castle Link.