User manual

9 CAX-01/CAX-03/CAX-04
You can control TV sets of all major brands after programming the Converter Box remote controller with the
PGM(Program) button.
1. Refer to the Program Code List (page 21 in this manual).
Find the brand of your TV set and a 3-digit program code. If your TV set is not on the list, skip the rest of
this section.
2. Keep the PGM button pressed while entering the correct 3-digit program code with the Number (0~9)
buttons. After entering the 3-digit program code release the PGM button.
3. Aim the remote controller toward your TV and press the TV POWER button on the remote controller
to check if the TV responds properly. If there is no response from the TV set, try step 2 again with
another program code. If your TV responds properly, the programming is completed.
P ROGRAM THE REMOTE CONTROLLER
+
1. Connect the AC power cable of the Converter Box to suitable wall outlet.
2. Press POWER on the converter box or BOX POWER in the remote controller.
The power indicator will turn green if power is on.
3. Press TV POWER of remote controller to turn on your TV
4. When the converter box is connected only to RF cable, if current channel of TV is not CH04 or CH03,
press CH04 or CH03 of remote controller. ※ Initial RF output channel is CH04
5. When the converter box is connected to RCA cables, if your TV is in Tuner mode, press INPUT of remote
controller to switch to AV mode.
T URN ON THE CONVERTER BOX