User manual
7 CAX-01/CAX-03/CAX-04
Ensure that the following the Converter Box and accessories are included. If an accessory is missing, please
contact the dealer where you purchased the product.
Note
※ CAX-03 and CAX-04 have analog pass-through.
~ These models are
capable of passing through the analog signal to the TV set in standby mode.
1. Connect an antenna cable to the “ANTENNA IN" jack on the rear of the Converter Box.
2. Connect the “RF OUT” jack from the Converter Box to the “ANT IN” jack on your TV using the RF
cable supplied with the Converter Box.
User Manual
RF cable
Batteries
Remote Controller
Converter Box
I
NSTALLATION
• If you connect “RF OUT” of the Converter Box to ANT. IN of your TV, you can watch the video and the
audio of the Converter Box on Ch.3 or Ch.4 of your TV. The RF output channels can be selected in
output channel of menu-option. (Refer to page 15)
Quick Start Guide
P
ACKAGE CONTENTS
A
NTENNA CONNECTIONS
Converter Box’s Rear Panel
ANT IN