User manual

23 CAX-01/CAX-03/CAX-04
General Specifications
RF Specifications
Symptoms Check Point
No picture & No sound
or Cannot turn on power
• Check whether the power is on
• Check if power cord is firmly connected to the product and the
power outlet
• Test the wall power outlet, plug another product’s power cord into
the outlet
Picture OK & No sound
• Check the volume level of the TV and product
• Check the MUTE state of the TV and product
• Press the Audio button to change the audio type
• Check audio cables are correctly connected to devices
No picture
• Check the product in operation mode
• Check the channel is on air
• Check video cables are correctly connected to devices
• Check the input source setting of TV
No color, or wrong colors
• Check the connection between product and TV
For a 3-wire component connection, match the red, green, and blue
cables from product to your TV
No OSD
• Check whether the video component cables are connected
If you want to display OSD, connect composite cable (Video Out)
instead of video component cables.
• Check the OSD display option in setup menu
The Remote Controller
doesn’t work
• Check to see if there is any object between the TV and the remote
control causing obstruction
• To manipulate the product with remote controller, the remote
controller's emitting part should directly point towards the receiving
part of product's remote controller
• Check the batteries are installed with correct polarity
• Install new batteries
Broadcasting Standard DTV(ATSC)
Demodulation Method 8-VSB (free channel only)
Power Requirement AC 120V~, 50-60Hz
Power Consumption 8 Watts under/ In standby: 1 Watt under
Dimension (WⅹDⅹH) 180 x 171.4 x 38(mm)
Weight 1.1Kg
Tuning System Type F/S
Band Coverage DTV 2~69
Antenna 75-ohm external antenna terminal
75-ohm F-Type Antenna in (1)
75-ohm F-Type RF Out (1)
Composite Video Out (1)
Input/Output
Analog L/R Audio Out (2)
T ROUBLESHOOTING
P RODUCT SPECIFICATIONS