User manual

CAX-01/CAX-03/CAX-04 20

You can select channels as described below.

Number and Dash (–) buttons (Remote Controller)

Use Number(0~9) and Dash (-) buttons to select a channel directly.

The Dash (-) button is used to enter a program number for multiple channels such as 1-1, 1-2, etc.

FLASHBK button (Remote Controller)

Press to return to the previous channel you viewed. For example, if the Converter Box is tuned to channel 54

and then you changed to channel 56, pressing FLASHBK will return to channel 54.

CH /▲▼ buttons (Remote Controller or front panel)

Use CH /▲▼ on the Remote Controller to cycle through the channels memorized in the Converter Box..

Shows the signal strength bar for incoming signal to help you adjust the antenna to the correct position for

your location. You can view the signal strength bar by pressing SIGNAL on the Remote Controller. And a beep

sound will be heard.

※ NEC Format (Carrier frequency=38KHz)

Custom Code: 01FE

FUNCTION KEY DATA FUNCTION KEY DATA FUNCTION KEY DATA

BOX POWER 00H - 19H DOWN 16H

MUTE 03H 0 0EH LEFT 14H

1 01H GUIDE 1AH RIGHT 17H

2 02H VOL + 18H MENU 0CH

3 06H VOL - 10H EXIT 0FH

4 04H CAPTION 1EH INFO 47H

5 05H FLASHBK 0DH AUDIO 41H

6 07H CH UP 13H RATIO 42H

7 08H CH DOWN 11H SIGNAL 1DH

8 0AH UP 15H

9 0BH ENTER 12H

PPENDIX

ELECTING CHANNELS

EMOTE CONTROLLER CODE TABLE

IGNAL STRENGTH