User manual

CAX-01/CAX-03/CAX-04 10
In the ‘MENU Operation’, there are several ways to customize the menu settings provided. Most menus consist
of three levels to set up the options, but some require greater depth for the variety of settings. If you press
MENU, only the first and second level of the menu system will appear on the TV screen. The third level can be
displayed by pressing ENTER or ▶. If a menu has more than three levels, the pop-up dialogue box will be
displayed as the fourth or fifth level. For navigating the menu levels, you will see ‘▶’ on the right side of the
menu label to help you go to the next level.
To view and remove the Menu
:
Press MENU on the Remote Controller to display the menu.
Press MENU again or press EXIT to return to TV viewing.
Enter next level
:
Press ENTER or ▶ on the Remote Controller.
Return to the previous level
:
Press MENU or ◀ on the Remote Controller.
Automatically finds all channels available through antenna or cable input. All of the active channels found from
this scanning process will be stored in the channel list. You can check the list in the ‘Channel Edit’ menu.
Note
Automatically finds any additional channel which was not found in ‘Channel Scan’ process.
• In case inactive or weak channels do not appear on the list, you can add the channel from the ‘Manual
Scan’ menu.
• If a channel is removed from the memory, you can always tune to that channel directly by using the
Number(0~9) buttons on the Remote Controller.
1. Press MENU. The main menu will appear.
2. Press ENTER or ▼ to enter the sub-menu of CHANNEL menus.
Use /▲▼ to select ‘Channel Scan’.
3. Press ENTER or ▶ to start finding available channels. If you want
to stop channel scan in the middle of the scanning process, press
ENTER.
4. After the channel search is completed, the channel which has the
lowest channel number will appear on the TV screen.
5. Press MENU or ◀ to return to the previous category or press
EXIT to return to TV viewing.
If the Lock System is ※ on, the ‘Channel Scan’ is locked. In order to
access ‘Channel Scan’, you have to enter the correct password.
1. Press MENU. The main menu will appear.
2. Press ENTER or ▼ to enter the sub-menu of CHANNEL menus.
Use /▲▼ to select ‘Channel Add’.
3. Press ENTER or ▶ to start finding available channels.
If you want to stop channel scan in the middle of the scanning
process, press ENTER.
4. After the channel search is completed, the channel which has the
lowest channel number will appear on the TV screen.
5. Press MENU or ◀ to return to the previous category or press
EXIT to return to TV viewing.
If the Lock System is ※ on, the ‘Channel Add’ is locked. In order to
access ‘Channel Add’, you have to enter the correct password.
M
ENU OPERATION - CHANNE
L
C HANNEL SCAN
C HANNEL ADD