Installation Guide
* 9.8
* 9.8
* ≥ 19.7
* ≥ 19.7
* ≥ 47.2
Drain outlet
Φ 4.3
0.2 ~ 0.4
Angle valve
5
INSTALLATION
INSTALL PREPARATIONS
1. Make sure that the floor tiles and the wall tiles have been paved, and that a pit
tube and a water supply pipe are reserved.
2. Reserve the installation position according to the dimensions given in the figure
below (symbols * refer to the recommended dimensions) to ensure normal use of
the water supply pipe.
3. Make sure the distance between center of the pit tube and the wall, i.e., the pit
distance, matches with the product.
4. Turn on the water supply switch to drain water to flush away the mud and other
foreign matters in the reserved water pipes to avoid blockage of the water pipes.
Unit: in
Pit distance 12










