Specification

Pre-installation
8
Hardware Included
Ceramic installation kits
Remote control & Holder
& Expansion screw set
PIC for reference only
Remote control batteries
Wax ring
User manual
Angle Valve & Flow restrictor
Multitap nut & Sealing gasket
Install the flange plate.
Align cardboard with the centerline of drain outlet， Draw contour line according to carboard.
≥12in
Drain outlet
Insert the wax ring under the toilet.
Nut
Install waxing ring into drain outlet; Install ceramic toilet on corresponding position according to contour line.
Put the screw through the fixing sleeve and then install it through the holes(on both sides of the toilet ceramic) to the mounting bracket on the ground ,and lock tight with a tool, put the decorative cap on the fixing sleeve.
Assemble the mounting bracket with bolts and then install them to the pre-installed flange plate on the ground and lock tight with nuts.
Position correctly the two fixing bolts of the flange. plate.
Shim
Wax ring
Mounting bracket
Decorative cap
Contour line
Screw
Fixing sleeve
Mounting bracket
D E
F G
Fixing bolt
Flange plate
Ceramic installation kits
Remote control batteries
Wax ring
User manual
Part
Quantity
Part
Quantity
Remote control
Holder
Expansion screw set
Angle Valve
Flow restrictor
Sealing gasket
1
1
1
1
1
2
2
1
1
1
1
2
Multitap nut
Installation card
Installation card
Model：CD-K010
INSTALLATION GUIDE
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USING.
Get free technical support for the lifetime of your product.
Email: [e-mail]
Phone: [phone]