Specification

SAVE THESE INSTRUCTIONS

(B) (C)

(A)

Safety Information

Grounding instructions

ADAPTER

METAL SCREW

TAB for

Grounding Screw

Temporary Connection

Preferred Connection

GROUNDING PIN

GROUNDED

OUTLET

GROUNDED

OUTLET BOX

This product should be grounded. In the case of an electrical short circuit, grounding reduces the

risk of electric shock by providing an escape path for the current. This product is equipped with a

power cord with a ground wire and a properly grounded plug. The plug must be plugged into a

properly installed and grounded socket.

★★★DANGER: Improper use of the grounding plug may result in electric shock

If the power cord or plug needs to be repaired or replaced, do not connect the ground wire to any

of the flat pins. The conductor with green stripe or without yellow stripe on the outer insulation

surface is grounding wire.

If you do not fully understand the grounding instructions or if you have questions about whether the

product is properly grounded, please consult a qualified electrician or maintenance personnel.

This product is for use on a normal 120 V circuit, and has a grounding plug that looks like the plug

illustrated in sketch A .in Figure 1. A temporary adapter, which looks like the adapter illustrated in

sketches B and C, may be used to connect this plug to a 2-pole receptacle as shown in sketch B. if

a properly grounded outlet is not available. The temporary adapter should be plugged into a

properly grounded outlet (sketch A) and should be installed by a licensed electrician. The green

colored rigid tab extending from the adapter must be connected to a permanent ground such as a

properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by the

screw.

The product is factory-equipped with a specific power cord and plug that allow connection to the

appropriate circuit. Make sure the product is connected to the same socket as the plug configura-

tion. This product should not use adapters. Do not modify the supplied plug, if it is not suitable for

the socket, please install the appropriate socket by a qualified electrician. If the product must be

reconnected using different types of circuits, it should be reconnected by qualified maintenance

personnel.

If an extension cord is required, only use a 3-core extension cord with a 3-core grounding plug

and a 3-slot socket that accepts the plug on the product. The damaged wires must be replaced or

repaired.