Specification

14
Operation
Side button description
Automatic rear
cleansing
Automatic front
cleansing
工作时(臀洗、妇洗、烘干)，按下旋钮执行停止命令。
Side button
definition
Side button
function
When sitting, press button to start automatic rear cleansing function. 15 seconds of rear
cleaning at fixed position→30 seconds of oscillate cleaning→rear cleaning at fixed position then
stop (An auto cleansing cycle is about 60 seconds from start to stop), and the wand automatic
retract →120 seconds of drying. Press button to end the cycle at any time.
When sitting, press button to start automatic front cleaning function. 15 seconds of front
cleaning at fixed position→30 seconds of oscillate cleaning→front cleaning at fixed position then
stop (An auto cleansing cycle is about 60 seconds from start to stop), and the wand automatic
retract →120 seconds of drying. Press button to end the cycle at any time.
All cycle times may vary
Press button to start flush function.
With the button pressed, the currently running function( rear cleansing, front cleansing,
warm air dryer, nozzle automatic cleaning) is stopped.
Flush function
Stop function
Standby mode
While leaving seat, long press button for 10 seconds will enter to standby mode. Press any
button on remote control or on seat will bring the bidet out of standby mode.
Long press side button to achieve flush in case power outage.
Emergency
flush mode
The indicator light icons is on indicating that the ECO function is turned on.
The indicator light icons is off indicating that the
ECO function is turned off.
The indicator light icons is on indicating that power is on.
The indicator light icons is off indicating that power is off.
The indicator light icons is on indicating that the
seat is heated.
The indicator light icons is off indicating that the
seat heat is off.
Indicator light icons
Icon
description
Icon