Specification

13
Installation
GROUNDING PIN
GROUNDED
OUTLET
GROUNDED
OUTLET BOX
Long press the remote control stop button, the first, third
and fifth LED lights start flickering indicating the remote
control connection is ready. Then release the remote
control stop button and power on the smart toilet. If the
connection succeeds, the five LED lights on remote
control will be on for 3 seconds then go off; if it fails, the
first, third and fifth LED lights will flash for 30 seconds
then automatically go off. If you want to quit the process
of connecting, please exit by pressing the stop button.
Long press the stop button Power on
Leakage protection test
Test frequency of 1-4 points below (once a month)
1. Under normal condition, press the "reset" button on the power
plug, the plug indicator light will be on and the product will start to
power on.
2. Normal working condition: under rated voltage condition, the
product will enter normal working state after completing the
self-inspection of water and electricity.
3. Press the "Test" button, when the leakage protection is normal,
the indicator light is turned off and the power is turned off.
4. Press the "Reset" button on the power plug again. The indicator
light will be on and the power supply is restored.
1. Check if any leakage occurs when the power switch does not work properly.
2. The leakage protection plug only protects the product connected to the power supply through the plug.
When using other electrical appliances, the product does not guarantee the leakage protection of other
products; similarly, the product does not replace the basic safety measures of other electrical appliances.
3. Do not ground the live wire directly, test the leakage protection function of the product plug.
Press the “Seat Sensor” position with your hand, at
the same time press the Rear/ Front cleansing button.
Check whether the nozzle works well.
Place a cup or bowl in front of spray nozzle to avoid
getting wet.
Tip: After switching on the power, the product will do
self-inspection.
Open the angle stop
Power on
Connecting remote control
GROUNDING PIN
GROUNDED
OUTLET
GROUNDED
OUTLET BOX
Connecting Remote Control
WARNING
Functional Test
Indicator light
Reset button
Test button