Specification

Rough-in 305mm/12in

390mm/15.35in

485mm/19.09in

410mm/16.14in

700mm/27.56in

Installation

1.Install the Adapter Nut, Angle Stop

1/2”NPT Male

1/2”NPT Female

1/2”G Female

Adapter nut

Teflon tape

(Not included)

sealing gasket

Angle Stop

Installed adapter nut and angle stop

Wrap Teflon tape on both outlets of water supply and angle

valve. Insert sealing gaskets in both sides of adapter nut,

then tighten direction N to water supply outlet, direction G to

angle valve outlet. Replace the existing angle valve with our

angle valve to ensure best performance of the toilet. To

ensure proper installation, call a professional plumber to do

the replacement.

*This product is suitable for AC120V/60HZ power supply. In order to ensure safe use, the socket and

its connecting wires must be able to withstand more than 15A current.

Technical drawings and power cord connections suggestions

NOTE:

It is necessary to install the provided angle stop in an

accessiable area for quick shutoff in case of an emergency.

The power socket can be installed on either left or right.

Suggestions on power line and water supply connection

150mm/5.9in

500mm/19.69in

400mm/15.75in

350mm/13.78in

450mm/17.72in