User manual

SmartGuard CS Client/Server User Manual

7.5.2 Tools Data Menu : Log Out

This function allows the current user to log out from the application without quitting the

system. By doing it, the subsequent user can log in to the system with their user ID and

password.

Before, the user can log out from SMARTGUARD CS Client software, he/she must input the

current log on password. If the password entry is valid, the below screen appear or else the

software will notify the user with “Wrong password” message and resume the process with

the current log on user ID setting.

7.5.3 Tools Data Menu: Change Pin

This is a very important function because it will enable the user to configure and set the 4

digits secret pin number of the cardholder (pin mode or card + pin mode). In order to

execute this function, the current log on user must have the Change Pin setting on during the

System user entry.

If the current log on user is being configured to set this setting, he/she will see the below

screen display. The user must select the desire record from the card list and then press

“Select Card” button to set the cardholder new pin number.

Select which card to chan

e their PIN number

Cass Technology Sdn Bhd 98