User manual

SmartGuard CS Client/Server User Manual
7.4.2 Download Menu: Update Card List to Controller
This function will allow user to control the card operation of CASTLE controller. The “Update
Card List to Controller” screen is consists of 3 list box. The top list box is the various type of
card operation to be sent to the controller. The left list box is the source destination
(“Existing Controller List”) of the controller list and the right list box is the target destination
(“Controller to be sent to”) of the controller list.
To perform a download card operation, the user is required to highlight the controller name
from the source destination that he/she would like to sent and click “>” to transfer the
selected item to the target destination, then he/she should select the type of operation to be
performed. (Install Card, Delete Card, Pin No, Card Expiry Status, and Door Accessibility).
If the user would like to undo the target controller, he/she should highlight the item from the
target destination by clicking “<” to reposition the selected item back to the source
destination. Besides that, the “<<” and “>>” buttons is for transferring all items in between
the source destination and target destination.
One last thing the users need to do is select the card ranges for the selected controller. For
all cards, please click the All Cards check box. For selected range, the user is required to
specify “From Card #” for starting range and “To Card #” for ending range. Once, the user is
confirmed on the selection and target destination, the user can press the “Send” command to
execute it.
Update Card User Settin
g
Cass Technology Sdn Bhd 94