User manual

SmartGuard CS Client/Server User Manual
7.4.1 Download Menu: Reload Settings to Controller
All the system setting that has defined earlier in the previous section are to be sending to the
CASTLE controller. The below screen layout will be shown upon selecting Reload Settings
command.
The Reload Settings to Controller screen is consists of 3 list box. The top list box is the
various type of setting to be sent to the controller. The left list box is the source destination
(“Existing Controller List”) of the controller list and the right list box is the target destination
(“Controller to be sent to”) of the controller list.
To download controller setting, first the user is required to highlight the controller name from
the source destination which will be send and click “>” to transfer the selected item to the
target destination. Second he/she should select the type of setting to be sent to the
controller. (Individual Door Setting, Global Door Setting, Card User List, Time Zone List, Time
Set List, Door Accessibility and Holiday List). Once the user confirmed on the download
selection and target destination, the user can press “Send” command to execute it. If the
user would like to undo the target controller then he/she should highlight the correct item
from the target destination by clicking “<” to reposition the selected item back to the source
destination.
Besides that, the “<<” and “>>” buttons is for transferring all items.
Download Settin
g
to Controller
Cass Technology Sdn Bhd 93