User manual

SmartGuard CS Client/Server User Manual
CHAPTER 2
2. INSTALLING SMARTGUARD CS
This section describes the hardware and software that you require to install SMARTGUARD CS software, and
how to install it.
2.1 Hardware Requirement
The following hardware specification is required to operate the SMARTGUARD CS software.
For the Server PC
• Standard Pentium III 450MHz PC with 128 MB RAM (depend on the size of the organization).
• 20 MB free hard disk space for program files
• One free serial Comm port to link up to the controllers
• One piece of network card that links it to other client PC’s.
For the Client PC’s
• Standard Pentium III 450MHz PC with 128 MB RAM (depend on the size of the organization).
• 10MB free hard disk space for program files
• One piece of network card that links it to the server PC.
2.2 Software Requirement
The SMARTGUARD CS software is written to execute under MS-Win95/NT operating system, in order to install
the SMARTGUARD CS software, the user is required to prepare a PC with MS-Window environment before the
SMARTGUARD CS installation take place.
Cass Technology Sdn Bhd 8