User manual

SmartGuard CS Client/Server User Manual
The SMARTGUARD CS Client software will pop up a dialog screen to prompt the user for a
floor plan map ID and map description. Besides inputting the floor plan record information,
the user is required to attach a graphical map into this floor plan record. To achieve this
operation, first of all, the user should press the “Get Floor Plan File” command, then the
user is required to select the desire floor plan map file (BMP) and click “OK” action to attach
the selected map file into the floor plan record. After that, the user is required to execute the
“Save This Floor Plan” command to relate the map file with the floor plan record.
Until this stage, the user has already finished the floor plan record and graphical map file
creation procedure. Next step is to link the CASTLE door into the floor plan map. The step is
very simple, first, click “Add Door To This Floor Plan” command to select the new installed
door. (Door Setting) Upon selected a door record, a symbolic icon will appeared at the middle
of the floor plan map. At this point, the user has successfully linked up a door object with the
floor plan record. Next the user must position the door object into the correct coordinate. The
location setting of the door object will be the actual display location of a door object during
the floor plan runtime.
The user can repeat the above procedure to insert the others door object in the floor plan
record. In case, the user did a mistake on the door object selection and would like to delete
the inserted object, he/she can simply highlighting the unwanted door object and choose the
“Delete Device Point From The Floor Plan” to remove it.
For deleting, the entire floor plan record, it is even simple, select the desire record from the
Floor Plan Record List and execute the “Delete This Floor Plan” command. The selected
record will be permanently removed.
To return to the main menu, please select the “Close” button.
Cass Technology Sdn Bhd 65