User manual

SmartGuard CS Client/Server User Manual
- Facility Code
The purpose of having this code is to distinguish the user card from one installation with
another. As we know the door access uses a card number as the main reference point in
the door access system. Therefore to avoid same card number to apply at both
installations, the CASTLE controller required the manufacturer to include in an extra
feature (facility code) to restrict the user swipes his/her card at different installation
location. As a result, every installation location should assign with a completely different
facility code to distinguish from each other.
- Auto PIN (10 sets PIN number)
A 4 digits pin number for accessing the doors when the Auto Pin mode is switched on.
The main purpose of having this is to provide an alternative manner to grant the door
access instead of doing the normal method swipe card at door reader manner. By
switching on this mode, the user is required to input the pin number.
- Auto Pin Time Zone (10 sets Time Zone for Auto PIN)
This setting is able the user to customize their auto pin mode according to the time
periods. The user is required to attach a time zone set to the door. If the time zone is
activated and the pin mode setting is set, then the door will automatically access user pin
number.
7.2.1.17 Data Menu: Browse Daily Time Attendance Transaction -> Daily
This function will enable user to view the daily time attendance transaction of each staff.
7.2.1.18 Data Menu: Browse Daily Time Attendance Transaction -> Monthly
This function will enable user to view the monthly time attendance transaction of each staff.
Cass Technology Sdn Bhd 62