User manual

SmartGuard CS Client/Server User Manual

7.2.1.5 Data Menu: Card Users -> Floor Zone (

Only for Lift controller

)

The SMARTGUARD CS software will enable the user to specify a total of 98-floor zone. Each

floor zone is making up by 6 range. For each range, the user can define their starting and

ending floor. The defined floor zone will be used in the Floor Accessibility setting at the later

section. Besides configure the floor zone, the software default has 2 pre-assigned floor zone

which are Free Access and No Access.

The user is able to add a new record by pressing “Add” command button; to delete an

unwanted record, the user must select the record which need to be deleted and follow by

pressing the “Delete” command button. As for modifying a record, select the data that

required to be changed and press “Modify” command button. Modify Floor Zone List dialog

screen will prompt out as below.

Press “Close” command button to exit.

Floor Zone Settin

Cass Technology Sdn Bhd 46