User manual

SmartGuard CS Client/Server User Manual
7.1.2.2 System Menu: Access Setting ->Anti-Pass Back Zone Code
To implement a higher security on the SMARTGUARD CS software, the user is required to set-
up the Anti Pass Back Zone definition. This entry will define the physical compound area of
the door reader of CASTLE controller on anti pass back checking.
To set-up, choose the correct controller and then press “Modify” button to bring out the
Location Zone Code entry screen and then input the entry and exit zone code for a controller.
Press “Close” command button to exit.
Anti-Passback Settin
g
7.1.3.1 System Menu: Software Setting
The function of Software Setting is to allow the user to configure the run time parameters of
this software. The Software Setting are divided into 5 type,
• PC Alarm Type (Consists of 2 model of alarm beeping, soft beep or continuous beep)
• Alarm Alert Option (For Future usage)
• Floor Plan Online (Switch to “Yes” will make enable activate floor plan)
• Company Name (Change the header for every report to display your own company
Name)
• Use Own Logo (Switch to “Yes” to enable ‘Select logo’ button and you can browse
for your own logo automatically change the header for every report
to display your own company logo)
• User Define (4 user define fields is available, this 4 fields with be appended
Into the Card User List.)
To edit the software setting, the user is required to press the “Modify” button. Edit PC
Setting dialog screen will prompt out as below.
Cass Technology Sdn Bhd 39