User manual

SmartGuard CS Client/Server User Manual

Press ‘Close’ command button to exit.

7.1.1.2 System Menu: Device->Door

After completed the Controller setting, the user is required to set-up the “Door” setting. The

maximum of the door count is depending on the controller model that selected by the user

earlier in the Controller Setting.

First, the user must be able to identify the following,

• Tag name (A unique ID to identify the Door)

• Description (The description of the Tag name)

• Select Controller (Click on this button to select which controller the

door connected.

• Controller Bus No (Display Buses information after select controller)

• Controller Unit No (Display address information after select controller)

• Door no (The physical count of the door)

• Lock Release Time (The door release period)

• Door Open Time (The door opening period)

• Emergency Master Pin (A 6 digits accessing programming mode pin number

during emergency mode)

Door Settin

The user is able to add a new record by pressing “Add” command button; to delete an

unwanted record, the user must select the record which need to be deleted and follow by

pressing the “Delete” command button. As for modifying a record, select data that is

required to be changed and press “Modify” command button. Change Door Setting dialog

screen will prompt out as below.

Press “Close” command button to exit.

Cass Technology Sdn Bhd 37