User manual

SmartGuard CS Client/Server User Manual
7.1 System Menu
Under the System Menu, the user can modify and update the SMARTGUARD CS Client system
databases.
The user is required to set-up the system databases before performing any door access
operation. The system menu is further divided into 3 main groups.
• Device
• Access Setting
• Software Setting
• Exit
7.1.1.1 System Menu: Device->Controller
Before the user run the SMARTGUARD CS software, he/she must set-up the Controller
setting. The SMARTGUARD CS can support up to maximum of 32 controllers. Under the
setting of the controller, the user must be able to identify the following:
• Controller name (A unique ID to identify the Controller)
• Description (The description of the Controller name)
• Address (The physical address of the controller)
• Bus No (Bus ‘0’, where’s the main PCI connected, Bus ‘1’, where’s
second PCI connected)
• Site Code (The location of the controller)
• Model (Type of the controller)
Controller Settin
g
The user is able to add a new record by pressing “Add” command button; to delete an
unwanted record, the user must select the record which need to be deleted and follow by
pressing the “Delete” command button. As for modifying a record, select data that is
required to be changed and press “Modify” command button. Change Controller Setting
dialog screen will prompt out as below.
Cass Technology Sdn Bhd 36