User manual

SmartGuard CS Client/Server User Manual

CHAPTER 3

3. BASIC FOR USING SMARTGUARD CS

This section provides some basic information that you will need to know in order to operate the

SMARTGUARD CS software. If this is the first time that you have used SMARTGUARD CS, you should read

through this section before continuing.

The section describes the following:

• The SMARTGUARD CS Server Screen Format

• The SMARTGUARD CS Client Screen Format

• Using keyboard to run SMARTGUARD CS

3.1 The SMARTGUARD CS Server Screen Formats

Figure 1 show the layout of SMARTGUARD CS Server screen format on PC monitor when the software is

executed.

The display screen consists of 3 main areas, namely, the Menu bar. It main function is to provide an interface

for the command option, where the user can execute.

The middle part of the screen is the on-line information data display area. It can be sub-divided into 6 areas,

which are

Latest All Events List, Latest Alarm Event List, Door List, Controller List, Connection Lis

t and

Command Feedback

Lastly, the bottom portion of the screen is to reflect the status information, such as log in user information,

last happened events, current date/time, IP address, Bus link, available hard disk spaces and currently being

processed CASTLE controller.

3.2 The SMARTGUARD CS Client Screen Formats

Figure 2 shows the layout of SMARTGUARD CS Client screen format on PC monitor when the software is

executed.

Cass Technology Sdn Bhd 10