Specifications

FingerPrint System
High speed MCU running at 24MHz
512Kbyte SRAM
On board battery backed Memory and RT C
100 Time Sets each with 3 intervals
100 Time Zones ( 9 days per set )
30 Holiday dates ( 2 sets )
Anti-passback
Duress Alarm
Controls up to 2 CAS-FPR1 door reader interface unit
( 1 door, 1 IN/1 OUT ) or
Control 1 CAS-FPR1 ( entry ) with exit push button ( exit )
Max. 640 FingerPrint Memory (Expandable)
Max. 10,000 transactions records ( First In First Out Basis )
1 Event Triggered Relay Output
1 General Purpose Relay Output ( Can be triggered manually
or by time zone control )
4 sensors ( can be controlled manually or by time zone control )
Equipped with 2 x 20 backlit LCD and 16 keys keypad for
programming
Menu Driven programming
2 modes of operation :
a. Fingerprint only mode
b. Fingerprint + PIN mode
3 levels of password :
a. Master Password
b. Technician Password
c. Alarm Control Password
On board buzzer for audible feedback
Housed in sturdy metal casing, coated with epoxy
Tubular cam lock for locking front casing & emergency
lock release (lock for fail safe)
Connects to CAS-FPR1 using 6 wires RS485
Can be networked together with other controller under
one PC software control using 2 wires RS485
( Total wire span 1 km )
Can designate one fingerprint as FingerPrint Registration
Station and user is not required to go to all the reader to
register their fingerprint.
Manages CASTLE-S-SERIES Controllers in one software
- Smartguard Pro.
Door lock, door release button and magnetic contact are
connect back to controller in order to provide more security
against the unauthorise break in on the door reader.
User - friendly
2 x 20 backlit LCD for usage guidance and time display
On - board buzzer for audible feedback
12 keys keypad
FingerScan Reader mounted on easy accessible location
Housed in sturdy metal casing, conted with epoxy.
Accessories :
SmartGuard Pro Access Control Software
Fingerprint Registration Unit
PC-Interface unit - PCI-PRO
Stock Code Description
( D x W x H )mm
CAS-FP-1 Single door FingerPrint 55 x 220 x 310
controller
CAS-FPR-1 FingerPrint reader 55 x 135 x 168
PCI-PRO PC Interface unit together
with SmartGuard Pro
Access Control Software
Controller General Specifications
Reader General Specifications
Ordering Information
Printer
Comm Port
PCI-PRO
PC bunded with
SmartGuard
Pro Access Software
CAS-FP-1
Castle Single Door
FingerPrint Controller
FingerPrint Reader CAS-FPRI
Entry
FingerPrint Reader CAS-FPRI
Exit
RS485 6 wires (1 KM)
RS485 (2wires up to 1KM)
Multi-drop 16 units CAS-FP
RS485 6 wires (1 KM)
Push Button
Magnetic Lock
Door Sensor
FingerScan
Registration Unit
System Configuration Diagram
16