Owner Manual

8
► Do not open the housing on the device under any circumstances. There is a danger of
an electrical shock if live connections are touched and the electrical or mechanical
structure is altered. In addition, functional faults on the device can also occur.
► Do not operate this appliance if it has a damaged cord or plug, if it is not working
properly or if it has been damaged or dropped. If the supply cord is damaged, it must
be replaced by the manufacturer or its service agent or a similarly qualified person in
order to avoid a hazard.
► Do not unplug by pulling the cord pull the plug.
► Do not insert metal objects or other objects into the device, as this could lead to an
electric shock or fire.
► Do not operate the device if it has come into contact with water or other liquids.
► Unlug the devie when it is not in operation, before cleaning and before performing any
repairs.
3 Commissioning
This chapter provides you with important safety notices during the initial commissioning
of the device. Observe the following notices to avoid dangers and damages:
3.1 Safety information
WARNING
Personal and property damages can occur during commissioning of the device!
Observe the following safety notices to avoid such dangers:
► Packaging materials may not be used for playing. There is a danger of suffocation.
3.2 Delivery scope and transport inspection
As a rule, the INOX² / INOX
4
is delivered with the following components:
• INOX² / INOX
4
• crumb tray • bun warmer • operating
instructions
Please note
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.
3.3 Unpacking
Remove the device out of the carton, remove the packaging material, shovel and
measuring container.