Operation Manual

caso SlimLine 3400 59
17.3 Causes and rectification of faults
The following table assists in localizing and rectifying minor
faults.
Fault Possible Cause To Rectify
Display is empty
Power plug not plugged
in
► Insert plug into
mains
socket
Fuse switch not
switched on
► Switch on fuse
switch
The E1 error appears
frequently during
operation
Cooking vessel too
small
► Use larger cooking
vessel
Cooking vessel not
centred on the hob
► Position cooking
vessel correctly
The E2/E6 error
appears frequently
Ventilation slots blocked
► Keep ventilation
slots free
Fan not running
► Send the appliance
to Customer Service
Please note
► If you are unable to solve the problem with the steps shown
above, please contact Customer Service.
18 Disposal of the Old Device
Old electric and electronic devices frequently still contain
valuable materials. However, they also contain damaging
substances, which were necessary for their functionality and
safety.
If these were put in the non-recyclable waste or were handled
incorrectly, they could be detrimental to human health and the
environment. Therefore, do not put your old device into the non-
recyclable waste under any circumstances.
Please note
► Utilise the collection point, established in your town, to return
and recycle old electric and electronic devices. If necessary,
contact your town hall, local refuse collection service or your
dealer for information.
► Ensure that your old device is stored safely away from
children until it is taken away.