Technical data

Troubleshooting
caso MCG 25 117
19.3 Causes and rectification of faults
The following table assists in localizing and rectifying minor
faults.
Error Possible cause Action
The selected program
will not start.
Device door is not closed ► Close device door
Power plug is not plugged in ► Plug in mains plug!
Fuse is not activated ► Activate fuse
The turntable turns
jerkily.
Dirt between the turntable and
the base of cooking camber
► Remove dirt
Dirt on rolling ring
Cooking vessel too large
► Use different cooking
vessel
Food is not sufficiently
defrosted, warmed up
or cooked after preset
time has elapsed.
Incorrectly selected time or
power level
► Re-set time and power
level
► Repeat process
The device functions
but the cooking
chamber lighting does
not work.
Defective cooking chamber light.
► Have Service dept
repair cooking chamber
light.
Abnormal noises can
be heard during
operation of
microwave.
Food is covered with aluminium
foil
► Remove aluminium foil
The cookware contains metal
and sparks are being created
within the cooking chamber
► Observe information on
cookware!
The time in the display
field is not correct.
Power failure ► Re-set time
Attention
► If you are unable to solve the problem with the steps shown
above, please contact Customer Service.