Operation Manual

caso Master E4 Slide 70
Pans do not
become hot
and appears
in the display.
The induction hob
cannot
detect the pan
because it is not
suitable for
induction cooking.
The induction hob
cannot detect the
pan because it is
too small for the
cooking zone or
not properly
centred on it.
Use cookware suitable for
induction cooking. See
section ‘Choosing the
right cookware’.
Centre the pan and make
sure that its base
matches the size of the
cooking zone.
The induction
hob or a
cooking zone
has turned
itself off
unexpectedly,
a tone
sounds and
an error code
is displayed
(typically
alternating
with one or
two digits in
the cooking
timer display).
Technical fault.
Please note down the
error
letters and numbers,
switch
the power to the induction
hob
off at the wall, and contact
a
qualified technician.
Fault Possible Cause To Rectify
E1/E2
Abnormal supply
voltage.
► Make sure the appliance
is connected to the
voltage indicated
E3/E4
Abnormal
temperature
► Please inspect the pot
E5/E6
Bad hotplate heat
radiation
► Please restart after
hotplate has cooled down
F0/F1/F2
Fan failure
► Please send back to
customer serivce.
F3-F8
F9-FE
Temperature sensor
failure
► Please send back to
customer serivce.