Operation Manual

10.3.3 Time setting
The system is under the state of time (TM is displayed). Press
„MODE“ for 2 sec.
Minute will twinkle on the display, then press „ ON/OFF/TARE“
slightly, setup the minutes.
Press „MODE“ slightly, hour will twinkle on the display. Press „
ON/OFF/TARE“ slightly, setup the hours.
After finishing the setting, press „MODE“, then the LCD display
shows the new time.
10.3.4 Unit Exchange
The system is under the state of weight, press „MODE“ to
select between „g“ and „oz“.
10.3.5 Over Load Indicator
When the scale is overloaded, „Err“ will appear on the display.
11 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and
maintaining the device. Please observe the notices to prevent damages due to
cleaning the device incorrectly and to ensure trouble-free operation.