Technical data

Commissioning
caso TeeGourmet 37
14.6 Assembling the accessories
Please note
► The device can only be operated with teapot and filter pot.
14.6.1 Water tank
Use the teapot (3) to pour the desired quantity of water into the
water tank (1). Pour the water slowly, making sure that all water
flows into the tank. Closing the lid too soon will lock the valve
and the remaining water cannot enter the tank. Pour at least 0.4
L, but no more than 1 L of water into the tank. Close the lid so
that it locks into place.
Warning
► The lid must always remain closed while the water is being
heated!
14.6.2 Filter and filter pot
Place the funnel (9) onto the filter (8). This makes it easier to
add the tea. Place the desired amount of tea in the filter (8).
Use the quantity recommended by the tea manufacturer.
Remove the funnel (9). Close the lid and insert the filter pot (2).
14.6.3 Teapot
Close the lid and place the teapot (3) on the warming plate (6).
Please note
► Always make sure that the lids are on the pots, before
operating the device.