User Manual
Table Of Contents
- 1 Operating Manual
- 2 Safety
- 3 Commissioning
- 4 Operation and Handing
- 5 Cleaning and Maintenance
- 6 Troubleshooting
- 7 Disposal of the Old Device
- 8 Guarantee
- 9 Technical Data
- 10 Manuel d'utilisation
- 11 Sécurité
- 12 Mise en service
- 13 Opération et manipulation
- 14 Nettoyage et entretien
- 15 Dépannage
- Ce chapitre est consacré à des indications importantes sur le nettoyage et l'entretien de l'appareil. Pour éviter la dégradation de l'appareil par un nettoyage incorrect et pour son bon fonctionnement veuillez observer les conseils ci-dessous.
- 15.1 Consignes de sécurité
- 15.2 Causes et rectification des défauts
- 16 Elimination des appareils usés
- 17 Guarantee
- 18 Données techniques
6
3.1 Vacuum packing using vacuum packing devices
Our Vacuum Glass Canister Set can be vacuum packed with all commercially available
vacuum packing devices with a hose connector. To do so, please connect the vacuum hose to
the device and the adapter to the vacuum canister valve.
For an optimal vacuum, please make sure that all components are firmly attached to the
following points during the vacuuming process:
Connection of vacuum hose at the vacuum sealer (1)
Adapter at valve on lid of canister (2)
Please note
When using a chamber vacuum packing device, canisters only require 5 seconds to
become sufficiently evacuated. Please abort the vacuum packing process early to ensure
your canister is not damaged. Please proceed with caution to prevent damage!