User Manual

Installing the Wall Mount Bracket
IN-16
1. Attach anchor plate to the projector using four M4×8mm hex head screws or
M4×10mm hex head screws.
2. Slide the bracket into the adjuster unit and secure it in place using the screws
specified in the illustration.
Important!Important!Impor tant!
 Note that you should use the three M5×8mm shoulder screws and one M4×8mm hex head
screw or M4×10mm hex head screw to secure the bracket. Take care that you install the screws
in their proper locations.
4. Install the projector.
M4×8mm hex head screws or
M4×10mm hex head screws
Projector anchor plate
Projector
Bracket
M5×8mm shoulder screws
Bracket
Adjuster unit
M4×8mm hex head screw or
M4×10mm hex head screw