User Manual

EN-9
Mastering TRACKFORMER Operations
The FUNCTION mode lets you change the
configuration of a variety of different settings.
1. While holding down the FUNCTION selector
button, press the sequence step key that
corresponds to the mode you want to use.
• Entering a mode causes the FUNCTION button as
well as the pads and sequence step keys that are
enabled in the mode to light.
2. To exit a FUNCTION mode, press the
FUNCTION button again.
To step back to the previous menu level, press the EXIT
selector button.
■ FUNCTION Mode List
Use the procedure below when you want to produce
all of the sounds in a bank or the sound of a particular
pad in a bank.
1. Enter the SOLO mode.
2. Press the sequence step key that
corresponds to the number of bank whose
sounds you want to produce, or press the pad
whose sound you want to produce.
This causes the corresponding sound or sounds to be
produced.
• The soloing bank (sequence step key) or pad will
become lit.
3. To cancel solo play, press the currently lit
sequence step key or pad.
Navigating Between
FUNCTION Modes
Sequence Step Key
(Mode)
Display
Message
Description
1 (SOLO) For sounding a
particular sound only.
2 (MUTE) For muting a
particular sound.
3 (CLEAR) For deleting data.
4 (COPY) For copying data.
5 (KEY SHIFT) For changing the pitch
of a sequence.
6 (MAX STEP) For changing the
maximum number of
steps in a sequence.
7 (SWING)For applying a swing
effect.
8 (MIDI CTRL) Enters the MIDI
control mode.
9 (PATTERN
EDIT)
For changing the
configuration of a
pattern.
10 (VELOCITY) For changing the pad
velocity (degree of
volume level change).
11 (PAD VOLUME) For changing the pad
set volume level.
12 (PAD ACTION) For changing the
operation of a pad
when it is tapped.
13 (SLICE
LENGTH)
For changing the
initial default slice
length.
14 (MASTER EQ) For adjusting the
master equalizer.
15 (METRONOME) Toggles the
metronome between
on and off.
16 (SETTING) For other settings.
Producing a Particular Sound
or Sounds
Sequence Step Key
(Mode)
Display
Message
Description
/
Banks 1 to 4
Pads 1 to 16