English EN/ES This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany. Español User’s Guide - Basic Operation Reference Guía del usuario Referencia de operaciones básicas Please keep all information for future reference. Guarde toda información para tener como referencia futura. Esta marca de reciclaje indica que el empaquetado se ajusta a la legislación de protección ambiental en Alemania.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
General Guide........................ EN-2 About the Separate Tutorial Manual .........................EN-2 Operating Precautions ..............................................EN-2 Included Accessories................................................EN-2 System Requirements ..............................................EN-2 Safety Precautions....................................................EN-3 Part Names and Functions .......................................EN-6 Connection Examples........................
General Guide About the Separate Tutorial Manual For the separate “User’s Guide - Tutorial,” visit the CASIO Website URL below. http://world.casio.com/ Operating Precautions Be sure to read and observe the following operating precautions. • Even if the product is within its warranty period as noted on the warranty certificate, use of the crossfader and volume controls in a way that exceeds their durability (such as excessive scratch play, etc.) may make their lifetime shorter than normal parts.
General Guide Thank you for selecting this CASIO product. Be sure to read these “Safety Precautions” before trying to use it. After reading this User’s Guide, keep it in a safe place for future reference. About safety symbols Various symbols are used in this User’s Guide and on the product itself to ensure safe use, and to protect you and others against the risk of injury and against material damage. The meaning of each of the symbols is explained below.
General Guide *Warning! Batteries Misuse of batteries can cause them to leak resulting in damage to nearby objects, or to explode, creating the risk of fire and personal injury. Be sure to observe the following points. • Never try to take batteries apart or allow them to become shorted. • Never expose batteries to heat or throw them into fire. • Never mix old batteries with new ones. • Never mix batteries of different types. • Never try to charge manganese or alkaline batteries.
General Guide Batteries Misuse of batteries can cause them to leak, resulting in damage to nearby objects, or to explode, creating the risk of fire and personal injury. Be sure to observe the following points. • Use only batteries that are specified for this product. • Remove batteries from the product if you do not plan to use it for a long time. Rechargeable batteries • Use Panasonic Group AA-size eneloop batteries or AA-size rechargeable EVOLTA batteries.
General Guide Part Names and Functions 15 6 5L 7 9 1 2 14 5R 3 4L 4R 13 8 10 No. 1 Controller: P (Power) button 11 12 Description: Turns power on or off. 2 EFFECT area Controls the EFFECT function. See “About FX (Effects)” for more information. 3 AUTO LOOP area Controls the AUTO LOOP function. See “About AUTO LOOP” for more information.
General Guide No. (2: EFFECT area) Description: DRIFT (INSTANT FX) [SHIFT] (4L or 4R) + FX (2: EFFECT area) SWAY (INSTANT FX) [SHIFT] (4L or 4R) + FX [W] (2: EFFECT area) CRUSH (INSTANT FX) [SHIFT] (4L or 4R) + LOOP [1/2] (3: LOOP area) BOUNCE LOOP [1/4] (Performs LOOP playback for the length set for the button.
General Guide NOTE • CROSSFADER Operations TRACKFORMER can be configured and positioned to allow CROSSFADER (5R/5L) operations by either righthanded or left-handed DJs. RIGHT SCRATCH selected Left-hand fader operation Right-hand JOG operation LEFT SCRATCH selected Left-hand JOG operation Right-hand fader operation EN-8 XWDJ1-ES-1A.
24 24 16 17 22 No. Item: English General Guide 18 19 20 21 23 Description: 16 USB port Connect with a computer’s USB port.* Connect to a USB2.0 or higher USB port. 17 iOS device connection terminal (Mini Din) Connect the Mini Din plug of the included Lightning/Mini Din cable when using an iOS device (iPad, iPhone, iPod touch). 18 SPEAKER ON/OFF switch Enable or disable output from the speaker on the bottom of TRACKFORMER.
General Guide Connection Examples IMPORTANT! • The Lightning/Mini Din cable takes priority over the USB cable. If they are both connected, the USB connection will not be recognized. NOTE • To protect your hearing when using headphones, make sure that you do not set the volume level too high. • Turn down TRACKFORMER volume as far as it will go before connecting headphones, and then adjust to the desired volume level after connecting.
Power Requirements Using an AC Adaptor Use only the AC adaptor (JEITA Standard, with unified polarity plug) that comes with TRACKFORMER. Use of a different type of AC adaptor can cause malfunction. Specified AC Adaptor: AD-A12150L • Use the supplied power cord to connect the AC adaptor as shown in the illustration below. Household power outlet Power cord Power terminal (DC 12V) AC adaptor Note the following important precautions to avoid damage to the power cord.
Power Requirements • Remove the battery compartment cover located in the center of TRACKFORMER’s bottom panel, and load six AA-size batteries into the battery compartment. Make sure the plus and minus ends of the batteries are facing as shown in the illustration. Using USB Bus Power While TRACKFORMER is connected to a computer with a USB cable, it can be operated on the power supplied over the cable.
Power Requirements 1. 2. Press Button 1 (P) to turn on power. Charging an iOS Device, Built-in Speaker Operation 1 To turn off power, press Button 1 again. NOTE • Turning off power puts TRACKFORMER into a standby state. Minute amounts of current continue to flow within TRACKFORMER in the standby state. If you do not plan to use the product for a long time or if there is a chance of a lightning storm in your area, be sure to unplug the AC adaptor from the power outlet.
Using TRACKFORMER (djay2 for iPad/iPhone) Before Using djay2 for iPad/ iPhone You can purchase algoriddim’s djay2 for iPad/iPhone from the App Store. If you already have djay2 for iPad/iPhone, make sure it is the latest version and update if necessary. For the latest information about djay2 for iPad/iPhone, visit the algoriddim website at the URL below. http://www.algoriddim.com • Also be sure to check the latest information about system requirements provided at the above website.
Using TRACKFORMER (djay2 for iPad/iPhone) Use the TRACKFORMER [PLAY/PAUSE] button to perform deck operations. Adjust the volume of the output using MASTER and/or HEADPHONE. Flow for Outputting Audio The 4-channel audio output from djay2 for iPad/ iPhone is divided between the L and R channels of MASTER OUT and the L and R channels of HEADPHONE OUT (for pre-cueing output). MASTER OUT MASTER OUT (STEREO) L English 5.
Using TRACKFORMER (djay2 for iPad/iPhone) 3. Basic Operation TRACKFORMER is a user interface intended mainly for scratch play. This section explains basic operations, mainly concentrating on the JOG platter, which is a distinctive feature of TRACKFORMER. z The examples shown in this section are all for the RIGHT SCRATCH setup. Move the JOG platter that is specified as the B-size ([B] button ON) forward and back to check the scratch sound over the headphones.
Using TRACKFORMER (djay2 for iPad/iPhone) About AUTO LOOP LOOP is a function that lets you repeat play back a section of a track. Loops can be woven together for virtually unlimited DJ mixing creativity. English z Setting a CUE POINT You can set a CUE POINT anywhere within a track by pressing one of the CUE POINT area buttons ([CUE 1], [CUE 2], [CUE 3]). After that, pressing a button starts playback from the applicable CUE POINT.
Reference Troubleshooting Symptom Included Accessories I can’t find items in the package that should be included. Power Power does not turn on. TRACKFORMER does not turn on when the power button is pressed. TRACKFORMER suddenly turns off after outputting a loud sound. TRACKFORMER suddenly powers down after a few minutes of nonoperation. Connections My iPad or iPhone does not recognize TRACKFORMER. My computer does not recognize TRACKFORMER.
Reference Model XW-DJ1 Terminals USB port iOS device terminal Line out terminal Headphones output terminal Power jack Type B Mini Din jack RCA pin jack (stereo); Output impedance: 1.3kΩ; Output voltage: 0.45V(RMS) MAX 3.5mm stereo mini jack; Output impedance: 2Ω; Output voltage: 1.
Reference AC Adaptor Handling Precautions Model: AD-A12150L 1. Read these instructions. 2. Keep these instructions on hand. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this product near water. 6. Clean only with a dry cloth. 7. Do not install near radiators, heat registers, stoves, or any other source of heat (including amplifiers). 8. Use only attachments and accessories specified by the manufacturer. 9. Refer all servicing to qualified service personnel.
English EN/ES This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany. Español User’s Guide - Basic Operation Reference Guía del usuario Referencia de operaciones básicas Please keep all information for future reference. Guarde toda información para tener como referencia futura. Esta marca de reciclaje indica que el empaquetado se ajusta a la legislación de protección ambiental en Alemania.
