User Manual

The projector’s firmware (software in the projector flash ROM) can be updated from a computer

connected to the projector’s SERVICE port (USB port for ROM updating) with a USB cable.

To connect the projector’s SERVICE port with a computer’s

USB port

Use a commercially available USB cable to connect the projector’s SERVICE port to the computer’s

USB port.

Use a USB cable with a micro USB plug on one end for connection to the projector’s SERVICE port,

and a plug on the other end with a shape that is compatible with the computer USB port.

Note

 For details about how to update the firmware, see the “Projector Firmware Update Guide”,

which is available at the CASIO website.

Updating Firmware

SERVICE port