User Manual

5
Projecting Computer Screen Contents Over a LAN
Connection
This section covers everything you need to know for establishing a LAN connection between the
projector and a computer, and projecting the computer’s display contents.
There are a number of different ways to establish a LAN connection between the projector and a
computer. The workflow below describes what you need to do to create a LAN connection.
Workflow from LAN Connection to Projection
Install Network Connection on the computer
“Software Required to Use Network Functions” (page 2)
Establish a wireless LAN connection between the
projector and computer
Establish a wired LAN connection between the
projector and a computer
“Connecting the Wireless Adapter to the Projector” (page 6)
“Connecting the
Projector to a
Computer via a
Wired LAN” (page
15)
 If you want to simplify the connection
process
 If you want to connect a computer
without connecting to an external
network (Internet or Intranet)*
1
 If you want to use an existing wireless
LAN access point (wireless router)
 If you want to connect a computer by
connecting to an external network
(Internet or Intranet)
“Establishing a Wireless LAN Connection
between the Projector and a Computer”
(page 6)
“Establishing a Connection between the
Projector and Computer via a Wireless LAN
Access Point” (page 13)*
2
“Network Connection Guide” (Separate manual)
*1 After establishing a direct wireless LAN connection between the projector and computer, the
computer will be able to connect with an outside network (Internet or Intranet) via the projector. For
more information, see “Connecting the Projector to an Outside Network without Terminating a
Direct Wireless LAN Connection with a Computer” (page 10).
*2 To connect this way, you need first to establish a direct LAN connection between the projector and
computer, and then configure settings to connect the projector to the wireless LAN access point.