User Manual

31
Appendix
You can project the screen contents of a computer running a Mac OS*
1
that is connected to the
projector over a wireless LAN connection. The conditions below are required in order to do so.
 On the projector, perform the required operation to change the projector’s SSID to a generic SSID
(casiolpj0101, casiolpj0102, casiolpj0103, casiolpj0104) or a user SSID. For more information, see
“Change the SSID” (page 19).
 Run Network Connection*
2
on the Mac OS computer, and then log in to the projector from Network
Connection.
Installing C-Assist on an Android or iOS smart device makes it possible to project smart device
images from the projector. C-Assist also makes it possible to use the smart device to control the
computer to which the projector is connected. The conditions below are required to perform these
operations.
 On the projector, perform the required operation to change the projector’s SSID to a generic SSID
(casiolpj0101, casiolpj0102, casiolpj0103, casiolpj0104) or a user SSID. For more information, see
“Change the SSID” (page 19).
 On the smart device, start up C-Assist and use C-Assist to log in to the projector.
Projecting Via a Wireless LAN Connection with
Various Different Devices
Using the Network Connection to Project from a Mac OS
*1 Note that functions may be limited by the version of Mac OS being used. For the latest information
about operating environments, visit the CASIO website.
*2 You can download Network Connection for Mac OS from the CASIO projector support site located
at the URL shown below. The CASIO projector support site also includes information about
required computer environments and operation details.
http://world.casio.com/download/projector/
Using C-Assist to Project from a Smart Device