User Manual

20
To log in to the Projector Admin pages over a wireless LAN
connection
1. Perform the procedure under “Establishing a Direct Wireless LAN Connection
between the Projector and a Computer” (page 7) to establish a wireless LAN
connection between the projector and computer.
2. On the Network Connection window, click and then click [Admin Screen] on
the menu that appears.
 This starts up the computer’s web browser and displays the “CASIO Projector” top page.
3. On the left pane, click “Projector Admin”. On the password input screen that
appears, enter the password. (The initial default password is “admin”.)
4. Click the [Login] button.
 If login proceeds normally, the “System Status” page will appear.
To log in to the Projector Admin pages over a wired LAN
connection
1. Perform one of the operations below ((A), (B), or (C)) to connect a computer to
the projector over a wired LAN connection.
(A) To establish a wired LAN connection between the projector and
computer using the IP address automatically assigned to the
computer
1. Use a LAN cable (use of a shielded LAN cable (STP) is recommended) to connect a computer
directly to the projector.
Projector Operation
2. Perform the following steps to display the IP Settings dialog box: [MENU] key 3 “Network
Settings” 3 “Projector Wired LAN Settings”.
3. Press the [] key to select “Manual” for “IP Settings”.
4. Press the [ESC] key to return to “Network Settings”.
5. Select “Update Network Settings” and then press the [ENTER] key.
6. In response to the confirmation dialog box that appears, press the [] key to select “Yes” and
then press the [ENTER] key.
Computer Operation
7. Check to make sure that settings are configured for automatic acquisition of the computer’s IP
address.
 An IP address is automatically assigned to your computer in accordance with the projector
IP address, and a wired LAN connection is established.
Using the Projector Admin Pages
Logging In to the Projector Admin Pages