User Manual

10
While there is a direct wireless LAN connection between the projector and a computer, the projector
can connect with a wireless access point that is connected to an outside network (Internet or Intranet),
without terminating the connection with the computer.
Important!
 This type of connection makes it possible for the computer to use the network (Internet or
Intranet) service connected to by the wireless LAN access point or router. The network
environment that can be connected to from the computer depends on the wireless LAN
access point or router.
 This type of connection assumes that a DHCP server is running on the network to which the
wireless LAN access point or router belongs.
To connect the projector to a wireless LAN access point
without terminating a direct wireless LAN connection with a
computer
1. Perform the procedure under “Establishing a Direct Wireless LAN Connection
between the Projector and a Computer” (page 7) to establish a wireless LAN
connection between the projector and computer.
2. On the Network Connection window, click and then click [Admin Screen] on
the menu that appears.
 This starts up the computer’s web browser and displays the “CASIO Projector” top page.
3. On the left pane, click “Projector Admin”. On the password input screen that
appears, enter the password.
 The initial default password is “admin”.
4. Click the [Login] button.
 If login proceeds normally, the “System Status” page will appear.
Connecting the Projector to an Outside Network without
Terminating a Direct Wireless LAN Connection with a
Computer
Wireless LAN connection
Wireless LAN access point
(or router)
Wireless LAN connection
Or wired LAN connection
Projector